Osburn 2000 Black Door Overlay Wood Insert

The new standard lowering the fine particulate emission threshold will be conquered by the recent certification of the Osburn 2000 wood burning stove. This revamped version now offers a particulate emissions rate of 2.3 g/h, a maximum heat output of 75,000 BTU/h and 79% optimum efficiency. This insert still has a 2.4 ft³ combustion chamber and a 144-CFM variable speed fan that is strategically positioned to redistribute heat throughout the room.

Designed to receive an optional faceplate that can cover a masonry hearth up to 32 inches (81 cm) high and 50 inches (127 cm) wide. A steel door overlay is available in black or brushed nickel as well as faceplate trims. Look no further, treat yourself to Osburn's legendary quality!

Specifications

Appliance Performance

⁽¹⁾ Values are based on test methods, except for recommended heating area, firebox volume, maximum burn time, and heat output.

⁽⁾ Recommended heating area and burn time may vary depending on location, chimney draft, climate, fuel type, and other factors. The heating area is defined by the manufacturer’s capacity to maintain a minimum temperature during power failure.

⁽²⁾ Maximum heat output (dry cordwood) is based on a loading density of 15-20 lb/ft³ and reloading intervals of 60-120 minutes. Other performance data assumes a fuel load of 7-12 lb/ft³ with 19-25% moisture content.

⁽³⁾ As measured per CSA B415.1-10 stack loss method.

⁽⁴⁾ Higher Heating Value of the fuel.

⁽⁵⁾ Lower Heating Value of the fuel.

⁽⁶⁾ Performance based on prescribed fuel load (7 lb/ft³, 19-25% moisture content).

⁽⁷⁾ Optimum overall efficiency at a specific burn rate (LHV).

⁽⁸⁾ Efficiency is optimized at a specific burn rate (LHV) and reflects the appliance's heat transfer efficiency at low burn rates.

⁽⁹⁾ This appliance is tested and certified by an independent agency.

⁽¹⁰⁾ Carbon monoxyde.

General Features